Home

wheel bearing hub assembly | eBay

GMB 730-0093 Wheel Bearing Hub Assembly

Too low to display


Timken® - Toyota Tacoma 2005-2009 Wheel Bearing Assembly

Remove any ABS wires attached to the hub assembly (if applicable) or unclip the wire and trace it to the plug. In many applications, if the ABS wire is integrated with the wheel bearing hub assembly, and a new one is going to come with it. If you're not sure, check the box of the new bearing and if there's an ABS wire, follow the wire until you locate the plug, unplug it and simply unclip it from its mounts. If ABS is present but not integrated with the bearing assembly, remove the sensor from the bearing with a ratchet and socket. If you do not have ABS wires, you can skip this step.

Place the backing plate back in its original place and place the new bearing onto the knuckle. You'll have to manipulate the drive shaft spindle splines correctly into the center of the hub bearing. Push the bearing on as far as you can but be sure to line it up correctly if ABS lines or plugs are present. Once it is on far enough, replace the wheel bearing assembly bolts. They're pretty long, so as soon as you can thread them into the new bearing, then start to tighten them. Pull the bearing in by tightening the bolts a little bit at a time and then switching to the next bolt. This will make sure the bearing assembly does not shift in the knuckle and cause damage. Once the bearing is drawn in flush, tighten the bolts one last time with the breaking bar as tight as you can get them.

Wheel Bearing Hub Assembly Diagrams

  •  Wheel Bearing Assembly
  • Timken® - Toyota Land Cruiser 2013 Wheel Bearing Assembly

    Remove any ABS wires attached to the hub assembly (if applicable) or unclip the wire and trace it to the plug. In many applications, if the ABS wire is integrated with the wheel bearing hub assembly, and a new one is going to come with it. If you're not sure, check the box of the new bearing and if there's an ABS wire, follow the wire until you locate the plug, unplug it and simply unclip it from its mounts. If ABS is present but not integrated with the bearing assembly, remove the sensor from the bearing with a ratchet and socket. If you do not have ABS wires, you can skip this step.

    South Shore Bearing Distributors has great prices on its inventory of front wheel & rear wheel bearing hub assemblies. We carry quality BCA and Auto Extra front wheel & rear wheel bearing hub assemblies.