Home

NEW Front Wheel Hub And Bearing Assembly EQUINOX VUE TORRENT XL 7 ABS

ACDelco FW293 GM Original Equipment Front Wheel Hub and Bearing Assembly with Wheel Speed Sensor and Wheel Studs

Too low to display


Longgo HU513121 Wheel Hub and Bearing Assembly Pair (Set of 2)

Wheel Bearings are some of the most commonly replaced parts on a vehicle. Constantly in use, the wheel bearing takes all the heat and stress of today's busy driving conditions. TechChoice Parts provides the AutoExtra brand of affordable replacement wheel bearings and hub assemblies. AutoExtra is the private label for Precision Bearing components, with excellent coverage for all vehicles using a combination hub and bearing assembly.

A wheel hub itself rarely has problems because it is simply a block of steel. The most common reason why a front wheel hub needs to be replaced is due to wheel bearing failure. Wheel bearings can fail because of age, dirt, and water contamination, or improper installation in the case of a two-piece hub and bearing assembly. A worn out front wheel bearing will usually make a grinding noise, which is more noticeable when turning in the direction of the side with the worn hub. Another reason why a wheel bearing and hub assembly will need to be replaced is if an ABS sensor built into the hub itself and is not working. When this happens, even if you have a perfectly good working hub, the entire front wheel hub and bearing assembly will need to be replaced.

Wheel hub and bearing assemblies

  • How to Know If A Hub Assembly Is Bad?

    Hub assemblies have become popular since first used on front-wheel drive vehicles. They integrate the hub of the wheel with the wheel...

  • How to Install a Wheel Bearing Hub Assembly

    A wheel-bearing assembly isn't much easier to replace than the old wheel bearings that required a machine press, but a wheel-bearing hub...

  • Hub Bearing Vs. Wheel Bearing

    The bearing assemblies on vehicles allow the wheel to rotate, as well as keeping the wheels adhered to the vehicle's body. Bearing...

  • What Is a Hub Bearing on a Car?

    A hub bearing on a car servers two primary purposes, including allowing the hub and attached components to rotate freely, and also...

  • How to Remove a Hub & Bearing Assembly

    The hub and bearing assembly on vehicles serves a very important function. The hub, which rides on an axle shaft, contains inner...

  • How to Measure Center Bore

    The machined center bore of a wheel determines the type of vehicle a wheel will fit. A center bore not matched to...

  • What Can Happen When a Rear Hub Bearing Goes Bad?

    Automobiles offer freedom on the open road, using many intricately connected systems for propelling the vehicle forward. Working alongside the car's wheel...

2000 - 2006 Jeep Wrangler Wheel Hub and Bearing Assembly

A wheel hub itself rarely has problems because it is simply a block of steel. The most common reason why a rear wheel hub needs to be replaced is because the wheel bearing that is attached to it has failed. Wheel bearings can fail because of age, dirt and water contamination, or improper installation in the case of a two-piece hub and bearing assembly. A worn out rear wheel bearing will usually make a grinding sound which is more noticeable when turning in the direction of the side with the worn hub. Another reason why a wheel bearing and hub assembly will need to be replaced is if an ABS sensor has been built into the hub itself and it is not working. When this happens, even if you have a perfectly good working hub, the entire rear wheel hub and bearing assembly has to be replaced.