- (1) Left Hand - Driver Side Power Door Lock Switch
2. If all the door locks work with the passenger side door lock switch, but not the driver’s door lock switch; then the problem is likely the driver’s switch.
4. If ALL door locks work only in one direction, either to lock or unlock but not both, then the problem is likely to be a bad door lock switch.
Installation Time: (approx) 1 Hour
Difficulty Level:Simple installation for anyone
Bring back the ease and convenience of power-locking and unlocking your doors with Dormans Door Lock Switch. Our meticulous attention to mechanical and electrical details ensures long-lasting performance.
If above, in the door lock section 4. “If ALL door locks work only in one direction, ether to lock or unlock but not both, then the problem is likely to be a bad door lock switch.” In my case its both switches (driver/passenger) that unlock ALL locks but not lock any of the locks and this is intermittent. I tried swapping the passenger door lock switch for the drivers side, same problem which I think would eliminate the switch. It doesn’t seem to be bad wiring as its same whether I move wiring around near switch or not. COULD it be that the BCM could simply need the contacts cleaned (i read where a guy with snowmobiles says when he unplugs every last wiring plug on the snowmobile 2 or 3 times and puts them back (it cleans the contacts by the act of plugging/unplugging) that it seems to miraculously make it work. Any help would be nice (all the door solenoids seem to work very well WHEN it does work intermittently). Thanks. Frustrated.